【 Weak current College 】-temperature floor heating system related terms explained

1, low-temperature floor heating system LowTemperatureHotWaterFloorRadiantHeatingSystem to temperature 60 ° c hot water as heating medium, in the price flow tubes, heating cycle, through the ground floor to radiation and convection heat transfer to the indoor heating heating.

2. tap water Mainfold
Water system, used to connect various heating water pipe with water.

3. set water Mainfold
Water system for the heating of water catchment water supply pipe.

4. surface SurfaceCourse
Building ground directly under a variety of physical and chemical effects of surface layer.

5, screed TowelingCourse
In bedding or floor surfaces for Trowelling find slope of structural layers.

6, isolation layer IsolatingCourse

Prevention of building various liquid on the floor or ground water, moisture through the ground floor of the building.

7. fill layer FillerCourse
In insulation or slab surface heating heating pipe or online set heating cable used in the structure layer to protect the heating device and make the ground temperature.

8. insulation InsulatingCourse
To block the heat, reduce the heat loss of structure is not valid.

9, moisture-proof layer MoistureProofingCourse

Prevent the building Foundation or floor ground moisture through the ground floor of the building.

10, expansion joint ExpansionJoint

Compensating concrete fill layer, the superstructure layer and layer such expansion or contraction of tectonic joints.

11, aluminum-plastic composite pipe Polyethylene-AluminumCompoundPipe
Inner and outer for cross-linked polyethylene or heat resistant polyethylene, a middle tier for reinforced aluminum tubes and layer using dedicated hot melt extrusion method, through the integrated heating pipe. According to the aluminum tube welding methods, divided into lap welding and butt welding of two forms, is usually marked by XPAP or PAP.

12, polybutylene pipes PolybutylenePipe

By polybutene-1 resin adding just the right amount of additives, the extrusion of heat-shrinkable tube of heating, usually marked with PB.

13, cross-linked polyethylene pipe CrossLinkedPolyethlenePipe

A density greater than or equal to 0.94g/cm3 of polyethylene or ethylene copolymer, adding just the right amount of additives, chemical or physical methods, linear macromolecules crosslinked into the three-dimensional mesh macromolecular structure of heating, usually to PE-X tags. In accordance with crosslinked in different ways, can be divided into peroxide Crosslinking polyethylene (PE-Xa), the heating network of silane crosslinked polyethylene (PE-Xb), electron-beam irradiation crosslinked polyethylene (PE-Xc), azo xlpe (PE-Xd).

14, copolymer tube PolypropyleneRandomCopolymerPipe
To propylene and ethylene copolymer in moderation, increase the amount of additives, the extrusion thermoplastic heating pipe. Usually PP-R tags.

15, block copolymer polypropylene pipe PolypropyleneOfRaisedTemperatureResistancePipe

To propylene and ethylene copolymers, adding just the right amount of additives, the extrusion thermoplastic heating pipe. Usually PP-B tags.

16, heat-resistant polyethylene pipe PolypropyleneOfRaisdeTemperatureResistancePipe

To ethylene and octene copolymer made of special linear density polyethylene copolymer, adding just the right amount of additives, the extrusion thermoplastic heating pipe. Usually PE-RT tags.

17, black bulb temperature BlackGolbeTemperature

By black ball thermometers indicate temperature values, habits, also called real feel temperature.

18, heating cable HeatingCable
For heating purposes, after power heating cable can be. By cold, hot and cold hot joints, where the heat conductor, hotline insulation, grounding shield and jacket, and other parts