【 Weak current College 】 air-conditioning refrigerant recovery equipment of four functions---Power By 【 China power house network 】

1. recycling: recycling process is the air conditioning system refrigerant to refrigerant tank. Due to the pressure of the refrigerant tank is roughly equal to the pressure of the air conditioning system (i.e., refrigerants condensing pressure), so called device has a booster function, this function implementations rely mainly on the compressor. Our products are used by the compressor is no oil-so that the device not only has a booster function, and can be used as a hydraulic pump. Recovery speed is improved, and can be gaseous, liquid and recycling.

2. regeneration: the regeneration process is recycled back to the process of handling refrigerant. Recycling of refrigerant in mainly solid particles, refrigeration oil, water, air, and several major categories. This task consists of drying filter. It can remove the recovered refrigerants and solid impurities in the water, not oil separator inside the device, you can isolate the recycling of refrigerant in the refrigeration oil. Because air belongs to the Non-Condensable Gas. After the end of the collection can be adjusted by the refrigerant tank drain valve on the discharge of air in the tank, the regeneration process guarantees the recovery of the refrigerant can again be used.

3. vacuum process: as the recycling of air conditioning system does not meet the requirements of the vacuum, so it must be on the air conditioning system thoroughly vacuum. This also helps to remove residual moisture in the system and other gases. Ensure that the filling into the system again the refrigerant is not pollution, this process consists of devices equipped with bulk imports two-stage vacuum pump, to finish, taking the more thorough, and help to detect air conditioning system of tiny leaks.

4. Add: air conditioning systems after maintenance needs to inject the refrigerant in the system, for small air conditioner, rely primarily on refrigerant tank and is sucked out of the system pressure before in the refrigerant into the system. For large air conditioning, this company to recycle charging machine design pressure filling function, the device's internal implementation of refrigerant compressor to transfer in the system. Rely on accurate electronic measurement system for automated quantitative charging refrigerant.