Weak current College】 【energy intensive supervision and administration of special equipment energy efficiency --- Power By】 【China power house network.

General Administration of quality supervision, inspection and quarantine of the Decree No. 116


The energy-intensive supervision and management of special equipment of energy-saving measures for the 2009-of the General Administration of quality supervision, inspection and quarantine for consideration by the Office, is hereby announced that since September 1, 2009.

Scrutinised on July 3, 2009


Energy-consuming energy saving supervision and administration of special equipment

Chapter 1 General provisions

First to strengthen the energy-consuming energy review and supervision of special equipment, energy efficiency, promote energy conservation, energy conservation under the People's Republic of China law, special equipment safety supervision Ordinance and other legal and administrative regulations.

Article 2: this method is called energy intensive special equipment, is the energy consumption during use or convert a large quantity, and greater energy saving space of boilers, pressure vessels, heat exchangers and other special equipment elevators.

Article III-consuming special equipment manufacture (including the design, manufacture, installation, renovation, maintenance, the same below), use, inspection and testing of energy-saving supervisory management, application of this approach.

The State quality supervision, inspection and quarantine (AQSIQ) is responsible for national energy intensive supervision and management of special equipment of energy-saving work.

Local levels of quality and technical supervision departments responsible for the administration area-consuming energy saving supervision and management of special equipment.

Article 5-saving energy-intensive supervision and management of special equipment for security monitoring and energy saving supervision of works.

Article VI, special equipment of energy-intensive production units, the units, testing and inspection bodies shall be in accordance with the relevant State laws, regulations and technical specifications of special equipment safety and other relevant norms and standards, to fulfil the obligation, to make energy-consuming work of special equipment of energy-saving, and accept State and local levels of quality and technical supervision departments of the supervision and inspection.

7 the State encourages the production of special equipment of energy-intensive units, the units use of new technology, new technology, new products, improve the energy efficiency level of special equipment. On the remarkable achievements of organizations and individuals, in accordance with the relevant provisions to be rewarded.

Chapter II-consuming the production of special equipment

Article 8 of the special equipment production unit energy consumption shall, in accordance with the relevant State laws, regulations and technical specifications of special equipment safety and other relevant norms and standards for production, ensure that the production of energy-consuming equipment complies with the energy efficiency index requirements.

Production of special equipment production unit shall not comply with the requirements of energy efficiency indicators or national industrial policies explicitly eliminated by energy intensive special equipment.

Article 9: design of energy-consuming, special equipment should be in the device structure, system design, material selection, process development, measurement and monitoring device equipped with, in accordance with the relevant technical specifications and standards for energy-saving requirements.

Article 10-consuming design files, special equipment shall be approved by the special equipment testing and inspection bodies, in accordance with the relevant special equipment safety technical norms and standards of identification may be used in the manufacture. Without identification or authentication of unqualified, manufacturing units shall be carried out in product manufacturing.

Article 11-consuming special equipment manufacturing enterprises of new products should be conducted energy efficiency tests. Without the energy efficiency tests or test results do not meet energy efficiency index requirements, shall be carried out in batch production.

Boiler, heat exchanger products in the manufacture of pressure vessels for energy efficiency tests. Elevator products in safety performance type test for energy efficiency tests.

Article 12 special inspection agencies received energy intensive special equipment manufacturing units of product energy efficiency test application, shall, in accordance with the relevant special equipment safety technical specifications and standards for testing, and produce energy efficiency test reports.

Article 13: special inspection agency on energy intensive special equipment manufacturing, installation, renovation, maintenance procedures for inspection of safety performance, you should also follow the safety and technical specifications of special equipment, to influence the energy efficiency of equipment or system projects, energy efficiency, energy saving test report of the supervision and inspection.

Without the energy saving supervision or inspection results do not meet the requirements, shall be ex factory or delivery.

Article 14-consuming special equipment factory file should be accompanied by special security technical specifications of the product energy efficiency test reports, equipment operation file and instructions and other documents.

Article 15 of the energy-consuming equipment installation, renovation, maintenance, and shall not reduce the product and its system of existing energy efficiency indicators.

Special inspection agencies find equipment and systems energy efficiency project does not meet the relevant technical specification requires special security, shall, without delay, inform the energy intensive special equipment installation, renovation, maintenance units. Been advised of the units shall, in accordance with the technical specifications for special equipment safety requirements for evaluation or energy efficiency test, meet the requirements before delivery.

Article 16-consuming special equipment installation, renovation, maintenance units shall surrender to use units of energy-saving technical information.

Chapter III-consuming the use of special equipment

Article 17-consuming special equipment to use units shall strictly implement the laws, regulations, special equipment safety technical specification and standard, to ensure that equipment and related system security, economic operation.

Energy consumption unit should establish special equipment using sound economic performance, energy efficiency measurement monitoring and statistics, energy efficiency assessment, energy-management system and post responsibility system.

Article 18-consuming units should use special equipment to use in compliance with the energy efficiency index requirements for special equipment, in accordance with the relevant special equipment safety technical specifications, criteria or requirements with the factory filesAnd installation of auxiliary equipment and energy monitoring devices, energy measurement instruments, and record the related data.

Article 19 of the energy-intensive units for the special equipment to use special equipment to use registration, shall, in accordance with the relevant special equipment safety specifications, provides energy efficiency certificates. The country has eliminated, not energy-intensive use of special equipment for registration.

Article 20-consuming special equipment safety technology archives should at least include the following:

(A) energy efficiency indexes containing design design documentation;

(Ii) energy efficiency test reports;

(3) device economy run file and operating instructions;

(4) daily run energy efficiency monitoring and recording, low energy condition records;

(5) energy saving technology information;

(6) the energy-efficient regular inspection records.

Article 21 on the special equipment to conduct assessment of workers, in conformity with the relevant technical specification of the special equipment safety, energy-saving management knowledge and skills into energy-consuming operations personnel assessment of special equipment.

Energy intensive special equipment to use units shall carry out energy conservation education and training, raising awareness of energy workers and operations level, ensuring the safety and economic operation of special equipment. Energy intensive special equipment of workers should be strictly enforced practice and energy management system.

The use of article 22 shall, in accordance with the boiler unit of special security specifications for boiler water (medium)-processing, acceptance of special inspection agency implementation of the water (medium) regular inspection of processing, guarantee the safe operation of the boiler, increase energy efficiency.

Article 23 boiler cleaning units shall, in accordance with the relevant special equipment safety specifications for boiler cleaning, accept special equipment inspection institutions of boiler cleaning process supervision and inspection to ensure the safe and effective for boiler cleaning work.

Article 24 special inspection agencies in periodic inspection, special equipment shall, in accordance with the special equipment safety technical specifications and standards for energy-intensive special equipment to use units of energy management and energy efficiency of equipment. Discovery does not comply with the special equipment safety technical specification and standard requirements, it shall require the use of units for rectification. When the inspection results exceptions or deviations from the design parameters are difficult to judge the efficiency of the operation of equipment should be engaged in energy-intensive special equipment energy efficiency testing testing and inspection bodies carry out energy efficiency tests to accurately evaluate its energy efficiency.

Article 25-consuming operation of special equipment and system do not comply with the special equipment energy efficiency specifications, and other relevant safety norms and standards, using the units shall analyze the causes, take effective measures to implement the improvement or alteration. Rectification or modification do not meet energy efficiency index requirements, may not continue to use.

Article 26 States explicitly in use out of the use of special equipment, energy-intensive units should timeframes be reconstruction or replacement. No modification or replacement of the due date shall not be allowed to continue to use.

Chapter IV supervision and management

Article 27-saving energy-consuming products promotion directory of special equipment and eliminate product catalog, in accordance with the law on energy conservation People's Republic of China shall be formulated and published.

In line with the levels of quality and technical supervision departments found energy intensive production units, the use of special equipment unit and the inspection bodies in violation of relevant laws, regulations and special equipment safety technical norms and standards of behavior that should be ordered in writing to be about flat correction.

Article 29 local levels of quality and technical supervision departments should strengthen energy-consuming work of special equipment of energy-saving effect of information collection, regular statistical analysis in a timely manner at a higher level of quality and technical supervision departments of the submissions, and the related work information into dynamic monitoring system of special equipment.

Article 30 of the State and the provinces, autonomous regions and municipalities directly under the technical supervision departments shall report regularly to the public energy-consuming energy efficiency status of special equipment.

Article 31: energy efficiency in energy-intensive special equipment testing testing and inspection bodies shall be in accordance with the special equipment safety supervision Ordinance as well as special equipment safety technical specifications and other related specifications and standards, in accordance with law, energy-consuming work of special equipment energy efficiency tests.

Article 32 in energy intensive testing of special equipment energy efficiency testing, inspection agencies should ensure that energy efficiency test results of the accuracy, integrity and traceability of the results of the test.

Article 33 in energy-intensive special equipment energy efficiency testing testing and inspection bodies found in special equipment with high energy consumption, excessive energy consumption serious shall promptly inform the units, and report the location of special equipment safety regulatory agencies.

Chapter five supplementary provisions

Article 34, the special equipment of energy-intensive production, use, inspection and testing activities violates these measures, in accordance with the energy conservation law People's Republic of China, the special equipment safety supervision Ordinance and other related laws and regulations provide for penalties and sanctions.

Article 35 of this approach by AQSIQ is responsible for the interpretation.

Article 36 of this approach since September 1, 2009.